mcarterbrown.com - View Single Post - So when did we start believing that the paintball industry knew what it was doing?

Grendel · 10-20-2009, 11:00 AM

Richmond Italias Revolution report on Catchackreports:
Richmond Italia’s Revolution | Catshack Reports

I supposes theses are all the data points we are going to get from "them"

<10 joules
0.50 caliber
"G.I Milsim ribbon allows them to make a shell that is 40% thinner than the .68 Caliber"
"The .50 Caliber paintball is lighter, weighing in at only 1.2 grams"
"Richmond explains and is supported by preliminary tests by Mike Phillips of TechPB that less wind resistance on the smaller .50 Cal allows it to keep distance and range capability."

Edit: Just a note for my own protection I am not in anyway supporting the claims of self proclaimed paintball god Richmond Italia or an other paintball celeb that may try to put words into my mouth. I am just passing on information from another site's report.

10-20-2009, 11:00 AM	#32 (permalink)
Grendel Seasoned Member Join Date: Apr 2006 Location: Lexington, SC	Richmond Italias Revolution report on Catchackreports: Richmond Italia’s Revolution \| Catshack Reports I supposes theses are all the data points we are going to get from "them" <10 joules 0.50 caliber "G.I Milsim ribbon allows them to make a shell that is 40% thinner than the .68 Caliber" "The .50 Caliber paintball is lighter, weighing in at only 1.2 grams" "Richmond explains and is supported by preliminary tests by Mike Phillips of TechPB that less wind resistance on the smaller .50 Cal allows it to keep distance and range capability." Edit: Just a note for my own protection I am not in anyway supporting the claims of self proclaimed paintball god Richmond Italia or an other paintball celeb that may try to put words into my mouth. I am just passing on information from another site's report. __________________ "Rather fail with honor than succeed by fraud." -Sophocles My Pyre #PY008 RF Oak Grendel's Feedback on MCB Last edited by Grendel; 10-20-2009 at 02:38 PM. Reason: Clarification ;)