Thread: Trracer pumps
View Single Post
Old 07-21-2006, 05:57 AM   #2 (permalink)
russc
Wookie D*ck
 
russc's Avatar
 
Join Date: Apr 2006
Location: Vancouver, BC

Trracers, and a little polishing on the bolt and hammer probably won't hurt them. They're pretty easy to keep in working order. If the cupseals go, you can use spyder seals. The valve comes off the back when the rear thumbscrew is removed, and you can access the valve internals by removing the brass hex nut from which the powertube protrudes.
russc is offline   Reply With Quote