Quote:
Originally Posted by ironchef97  Garg's internals are the EXACT same as a phantom, the only difference is that the valve has the diffuser...which means maybe less air is wasted due to hammer bounce, or liquid is being released through the powertube instead of air since there is so little space inside the valve? Also, the diffuser could mean that the gun "sips" air instead of gulping it...Everything else is the same, I have like 4 sets of phantom internals I switched around into my Garg.
Any chance that there is a "lip" on your redux barrel or freak insert?
What about taking all your redux internals and putting them in a phantom? Or at least change the TPC onto a phantom, isolate and see if that is the cause of your ball breaks? |
I'm with you Ironchef.
I can tell you I've checked the Redux for barrel/breech flaws and can't find any.
I've also tried over-bored Freak inserts (think "0.684") with sub-0.680 Marblizer and had the Marbs explode in the barrel, leaving paint all over the TPC. (standard TPC, not drilled)
That says to me it's the blast at the TPC that's the problem.
I have NOT tried the BBA valve yet. Right now, the 12-gram dumps straight into the ports on the power-tube which
may mean liquid is getting into the power-tube and at the paint.