View Single Post
Old 03-31-2010, 09:14 PM   #5 (permalink)
Angelballer
Seasoned Member
 
Angelballer's Avatar
 
Join Date: Jan 2009

Quote:
Originally Posted by Redbeard the Pirate View Post
After having to look for/ask/trial and error buying to find a bunch of different screws and nuts for my phantom I figured it would be nice to have a thread that had all the hard to find numbers in one place. I'm dumping everything I've learned from my phantoms in here, along with any other info you guys can give me.

Ghost rings: 3-56 thread. The posts are available through Mike at CCI. Also you use certain hiviz sites to replace these posts such as: Cabela's -- HiViz Spark Sight (thank you Bradys71!)

Bottomline screws: 10/32 and depending on accessories are usually 1/2" to 1" long

Front body screw: 8-32, length will depend on what cocking system you use.
Stock is 1/2" Thumb screw (Thanks Stilgar!)
Wevo U/C kits use a 5/8"
(any other U/C kits please let me know your length)

Rear body thumb screw: Larger than the front?! 10-32

The nut for the pump arm: 10-32 (Thanks Timmycuddler!)

Grip frame screw: 1/4"-20 3/4" SHCS (thanks Angelballer!)

Barrel threads: 14 TPI acme stub (Thanks Timmycuddler!)

Grip screws: 6-32 x 1/4 (Thanks thisissparta!)

Feed tube screw: 8-32 x 5/8" (Thanks thisissparta!)

Please add your input
The nylon set screw inside the bolt is also 10-32 x 1/8" and the threads in the air adapter where the retainer screws in is 9/16"-20 if I remember correctly.
Angelballer is offline   Reply With Quote