View Single Post
Old 05-11-2010, 09:46 PM   #8 (permalink)
Mill Monkey
Echo's Avatar
Join Date: Jan 2009
Location: Orange County, California

The most common problem is seating the front bolt all the way back against the power tube before you instal it. Make sure that you leave it about a quarter inch in front of the power tube when you screw the regulator block to the aluminum reciever. Once that's done THEN put your spring and barrel in. You should hear a click as the bolt slides past the sear if you did it correctly.
Anonymous Assassins Paintball TeamJust look for the pink shirts

MCB Feedback
SpecOps Feedback

Laws of Thermodynamics;
1) You cannot win, you can only break even.
2) You cannot break even.

Echo is offline   Reply With Quote