View Single Post
Old 07-14-2010, 01:43 PM   #7 (permalink)
MCB Member
sdawg's Avatar
Join Date: Dec 2006
Location: Texas

Mags need HP air and 850psi and above is a requiremnt
Level 7 (and earlier) automags were designed to solve the problems presented by CO2 as the power source with pressures dropping as low as 500psi.

Of course, high pressure air is a better power source for an automag.
Everybody: Let's ease up on the red loctite, 'kay? Thanks.

MCB Feedback
sdawg is offline   Reply With Quote