View Single Post
Old 04-26-2007, 02:19 AM   #6 (permalink)
c6quad
Post Whore
 
c6quad's Avatar
 
Join Date: Apr 2006
Location: NC

it makes perfect sense. you can take a wooden dowel and stick it down where the 12 gram goes and put it on the edge of the nutsert (don't touch the screw) and lightly wedge it enough to keep it from spinning and you should be able to back out the screw. that has worked for me before.

you can also pull the trigger frame straight up while turning the screw. that will sometimes keep the nutsert from spinning. that has also worked for me.
c6quad is offline   Reply With Quote