mcarterbrown.com - View Single Post

Magoo · 08-10-2010, 05:21 PM

Here ya go, man.

The dimensions I had it milled to:

I got those dimensions with a tape measure, so they are not that accurate. However, it seemed to work nicely. BOS didn't like the way the milling would look with just half milled out (like on my example pic on the bottom right), so he just milled up the entire side. I agree with his decision.

Oh, by the way, DO NOT COUNTERBORE THE CAP HEAD SCREW HOLE ANY DEEPER. There is an air line just below that.

08-10-2010, 05:21 PM	#6 (permalink)
Magoo Formerly DeTrevni Join Date: Sep 2006 Location: Houston, Tejas	Here ya go, man. The dimensions I had it milled to: I got those dimensions with a tape measure, so they are not that accurate. However, it seemed to work nicely. BOS didn't like the way the milling would look with just half milled out (like on my example pic on the bottom right), so he just milled up the entire side. I agree with his decision. Oh, by the way, DO NOT COUNTERBORE THE CAP HEAD SCREW HOLE ANY DEEPER. There is an air line just below that. __________________ 61 people like me thus far, and none don't!