Originally Posted by 98ssuck
Why not fill 12oz with the 850psi of air from your hpa tank?
Originally Posted by Angelballer
How are you going to regulate it to only 850 psi? In other words, bad idea for safety reasons. Also, 12 oz at 850 psi will be quite a bit less air than say a 13/3000 so I don't even know if you'll get 40 shots out of it.
Originally Posted by O CAB05
Putting hpa in a co2 tank is just crazy talk. If you did that. It might be considered a bomb. Therefore, You could run to the other side of the field, take out yourself, and maybe the other team. Therefore, you took one for the team. Then your team can go grab the flag and win the game.
A it wont work hardly at all, because volume is what matters in this case, not pressure, it will basically be like you shooting from a co2 tank thats out of co2
B its not hard to do, all you gotta do it attach an asa to you tank, and an asa to the co2 tank, the HPA tank wont fill the co2 tank past the regulated output of the reg , you cant put 1000 psi into something when the filler is less than that
C its not that dangerous, just impractical, and in-effective, its not dangerous because your not exceeding the structural limits of the tank, youd need to break 1500 PSI to start making things dangerous, and thats what burst disks are for
D, running co2 isnt gonna hurt anything. gas is gas, is gas... buena doesnt react any differently to the gas from CO2, liquid might cause problems, but its not gonna cause any irreparable harm
ive run co2 through many regs that werent "designed" for co2, they just get cold, ive even run electros off Co2, and im still alive to tell the tale, and the gun didnt break either and if your wondering, it was a matrix, which is FULL of buena o-rings