View Single Post
Old 09-14-2010, 02:52 AM   #3 (permalink)
nostayhome
MCB Member
 
nostayhome's Avatar
 
Join Date: Apr 2008
Location: Eastside of da "808"

CCM Fan
I'm a little confused. My 86 hinge frame is a screw that is the trigger pin. Do you have a 86 slider frame? In which case the sear pin slides in and out. In any case, I would only snug it down slightly more then is needed to keep the pin in place. A little bit of blue loctite might help also.
nostayhome is offline   Reply With Quote