Thread: T2 consistency
View Single Post
Old 09-29-2010, 01:58 PM   #1 (permalink)
Post Whore
Mel's Avatar
Join Date: Sep 2007
Location: Far- Nor-Cal

T2 consistency

Hey there Pump people!
We have had more and more questions on T2 consistency with trying to run the gun under 280FPS. Here is a quote off PBN with the question:

"ok here is the thing i have set the reg to 300 psi and i can't get the marker to chrono under 280. the problem is the field we play is 270. if the Reg is adjusted down to meet this it doesn't keep enough pressure on the valve to seal it back up so it will leak till i cock it again. any suggestions."
Here is the CCM reply:
CCM regs leave factory direct set at approximately 350 PSI. The optimal FPS range on our markers is 280 to 300. To achieve consistency between the 250 to 280 range we'd advise to try a softer main spring. If you have any further issues please don't hesitate to contact us directly.
Mel @ CCM
Hopefully this info will help spearhead any other sort of issue. As stated above, you have a problem give us a call, we'll be more than happy to help.
Originally Posted by Bored383 View Post
I don't care what anyone uses to play - just don't be a douche to your fellow players. Its the golden rule.
Mel is offline   Reply With Quote