View Single Post
Old 10-05-2010, 01:14 PM   #5 (permalink)
Mel
Post Whore
 
Mel's Avatar
 
Join Date: Sep 2007
Location: Far- Nor-Cal

CCM Fan
Quote:
Originally Posted by Jdohman View Post
Got the problem fixed. CMM techsupport is great.

Basically I switched from a 45 trigger to a 86 and the sears are different sizes. I had to turn the top allen under the bolt 1.5 turns until it was timed correctly.

Basically hold the trigger down and pull the pump handle back. then bring it slowly forward until it fires.

Look at the spot where the gun fired. If it is over the size of a nickel 1/8 inch then you need to adjust it. Turn the allen head clockwise a half turn at a time until you get close then find the sweet spot.
The guy you talked to was Rod. If you have any other questions or issues please don't hesitate to call back.
~M
__________________
Quote:
Originally Posted by Bored383 View Post
I don't care what anyone uses to play - just don't be a douche to your fellow players. Its the golden rule.
Mel is offline   Reply With Quote