pix or a tutorial ?? ive got an old pt-x that id love to play with , but it leaks like no tomorrow around where the 12 gram puncture pin is ......
Originally Posted by Rockfrog
I just replaced the 12g seal on my 'new to me' old PT Extreme. Leaked like a seive when it arrived .... replaced the stock 1/8NPS hex head plug with a proper 1/8NPT flush plug to cure one leak. I replaced the 12g seal with a urethane 'cocker cocking rod bumper (had to try something and couldn't find anything else) to cure the other ... so far it's survived three full 12g dumps and four more I fired off for testing and chrono.
I am planning to replace the flush plug and run it on remote once I decide how to route the line to the bottom.