Thread: tank spacer
View Single Post
Old 10-12-2010, 03:07 PM   #1 (permalink)
Stripes
Furries are EVERYWHERE :3
 
Stripes's Avatar
 
Join Date: Dec 2007
Location: Palatine IL

tank spacer

I need a special tank "spacer" made

about 1" long (shorter=better)
made so I can screw a tank in one side, and the other side into a standard ASA

1/8 NPT threaded on the side (1 or 2)
NO output on top
top cut to clear ASA pin

This will be so I can run a 3.5 on my vert asa on my phantom, I have a punisher kit that the guide rod holes were drilled into the air chamber, so I can't use it as a proper ASA

if anyone could let me know if they can do it and an approximate quote, that would be great
__________________
Quote:
I love sucking the juice out of pickles. -slowerpig81
Stripes is offline   Reply With Quote