View Single Post
Old 10-29-2010, 02:34 PM   #8 (permalink)
Ask me about my
Skibbo's Avatar
Join Date: Oct 2009

Originally Posted by 3L1te hax View Post
You get worse velocity using HPA because there is no liquid to expand, like CO2

However i would also be interested in threading a goblin Deuce, because due to the length of hte barrel/ catridge the Solo (less so on hte Duece because of increased length) the ball does not have enough space to reach maximum velocity...

People experimented using freak inserts instead of the cartridge casings and only got positive results.. however i think the area that allowed a freak insert to be used was filled in...

If that makes any sense
For the velocity part:
"Higher velocities in the 280-300 FPS range have been recorded, using compressed air, although this can cause faster wear of the O-Rings. It is therefore recommended that GOBLIN Air Cartridges be filled with CO2 whenever possible, especially when lower velocities are desirable or necessary."

and for threading:
"-Solid Barrel 'ends' can be tapped for Barrel Extensions"

and velocity issues:
"Longer Barrels dramatically increase the performance potential of the Air Cartridges"

All of that is from Goblin
Originally Posted by heinous View Post
i find this easy to masturbate to
Designer of the first legit looking ego pump, the EgoP!

Tinkerer/ Pump lover
Team Akkadian Paintball Squad
OK D-Day '09 - German 716th IR
Skibbo is offline   Reply With Quote