Thread: cocker question
View Single Post
Old 05-29-2007, 10:36 PM   #3 (permalink)
Wycke
Supernatural Anaesthetist
 
Wycke's Avatar
 
Join Date: Apr 2006
Location: Cheesesteak Country
Send a message via AIM to Wycke

For the most part, you'll be better off with a high pressure tank. Low pressure HPA tanks are really designed for markers designed specifically for low pressure use (ie: most electros). Even e-framed 'Cockers will likely work better with a high pressure tank and a good inline reg (ie: PPS Stab, AKA Sidewinder or the like). Remember, you can always regulate pressure down, but you can't regulate it up (as in, an 850 PSI tank can be tuned down to 400 PSI with most any decent inline reg, but a 450 PSI tank is only going to put out 450 PSI regardless of the reg in between - if your gun works at 450 or below, you're fine, but if not, you're SOL...)
__________________
Porch Monkey 4 Life!

s'ok...I'm takin' it back...

My Feedback Thread
Wycke is offline   Reply With Quote