View Single Post
Old 12-20-2010, 12:35 AM   #12 (permalink)
secretweaponevan
Marathoner
 
secretweaponevan's Avatar
 
Join Date: Aug 2007
Location: Pocono Lake, PA

Level 10 bolts require a higher operating pressure to work.

The original regulator piston was set to vent at a pressure that would fire too hot for a level 7 bolt. Since the level 10 bolt requires a higher pressure, the venting pressure of the original regulator piston is too low. You can either adjust the venting pressure if you have a vise and some wood, or you can buy a new regulator piston assembly from AGD or Tunamart.
__________________
"You don't use science to show that you're right, you use science to become right." -xkcd 701
feedback
secretweaponevan is offline   Reply With Quote