Ok so I suck, I didn't post pictures but here is a discription of what I did.
Please note that I don't think this will work, at least not as well. Without a RTR or other type feedgate.
I took an old 10 rnd tube that had a crack in it and I cut a notch in the bottom of it (the rounded end). I cut it at the point that it curves out the furthest (1/2 way up if it's laying on it's side) and cutting back far enough that it will let the balls drop into the chamber. Then cut the tube to the proper lenth, wrap electrical tape around it to help hold it in place. Then installed the RTR feedgate.
So far it really works like a charm testing it. feeds into the gun quite well and even has a little lip to help prevent the next ball to be fed from rolling back away from the feed port.