Quote:
Originally Posted by cjottawa  Yup. I was thinking EXACTLY what you were about DSA's marker.  The photos in his review seem to suggest his is configured the same as mine though: Redux Upgrade 1.1 Review
Perhaps he's just been fortunate to have large Texan balls. Paintballs.
I expect I'm going to have to have metal welded back on before grinding things down; the "point" can't really be milled off because the material below it on the port is already very thin. |
Hm, well if you have any paintball machinists local to you, I'm sure they could mill it without cutting too close *coughDukiecough*.
I think using a hand file will take a long time, and a grinder is hard to control since you have to maneuver the snub relative to the grinder (especially with the snub being stainless steel). Also that snub will become hot as **** while you're grinding the spot down, and do you have a variable speed grinder? I've been learning how to work with stainless steel the last 2 months, and it is a bitch to cut, I think the fastest, cleanest and most precise method to achieve your goal is a mill, preferably done by a machinist who does paintball work.