Quote:
Originally Posted by short304  Did you ever get pics of this??? like CJ I too would love to see... of coarse, I haven't even held my dux yet, but reading through this thread has peaked me interest in the possible solutions...  |
A "detent" won't work in the Redux. A detent only works in guns where the first ball in the chamber is rolling forward; on the Redux it isn't. The second ball sits directly on TOP of the first and STILL gets chopped.
The solution is going to be either a "shelf" (quasi-bore drop conversion) or milling the feed block with a ramp, as Splattttttt and WK2 suggested above. Working on that now - similar design to the DuckSlide.
Quote:
Originally Posted by splattttttt CJ, I got to play with PBweasel's Redux a few days ago.
He showed me a trick.
Apparently, with the gun tilted down slightly, a single round will place it self in that tray and will stay in place even when the gun is tilted back allowing the remaining paint to move away from the feed port.
Tilting it back, will allow you to pump and load the ball into the breech, while the rest of the other balls are safely in the stick feed.
Doing this, I had no trouble with pinching. |
You just described how I pump my Redux.