View Single Post
Old 04-28-2011, 01:47 PM   #3 (permalink)
capitalpaintball
MCB Member
 
capitalpaintball's Avatar
 
Join Date: Jul 2006
Location: Coventry R.I.

the 2 orings on the valve are bottle orings, if you are removing the valve you might as well change them. inspect the valve seat on the valve pin, if it looks "hairy" or gouged it needs replacing. I have had real good success with polishing the valve seats, just put the valve pin in a high speed drill and use steel wool on the seat until its smooth.
capitalpaintball is online now   Reply With Quote