... on another note, I had my first 'pinch' this morning during "test pumping"... I decided I wanted to see what all the fuss was about BEFORE hitting the field tomorrow and I found out that it LITERALLY slices Xball PBs in half w/ little, if any, 'crushing'...BUT this pinch occured on the couch before heading out to shoot it over a chrono and I didn't get any pinching during test firing/tuning over the chronograph - I"m attributing the pinch/chop I had from pumping to cautiously during 'test-pumping' on the couch this morning, because otherwise it pumped great at the chrono...
As for chrono results (cuz I know someone will probably ask), I was using .677-ish Xball paint in a .675 Ty Freak insert, w/ Red main, Yellow valve (as set up from ShaDawg, thanks again
, 65deg F outside, and I was getting 35 shots over 220FPS (w/ #36 at 219FPS, and #37 at 169FPS!), with the first 32 shots ranging from 247-261FPS... this is a bit lower than I'd like to shoot (velocity wise) but I can't complain about the efficiency much!
Anyways, hope you guys like the case. It's a Pelican Case 1490 brief case.