mcarterbrown.com - View Single Post

Chaos · 07-29-2007, 02:24 AM

You can replace the banjo fittings with those from Tippmanns (You'd need one like the one from the LP kit for the RT/Cyclone kit)

As for a reg,I'd say get a AKA 2 Liter over anything else.They have the fastest recharge rate and highest flow you can get.I got +/- 2 fps across the chono just as advertized.

Recommend the Shocktech body kit for it as well.Milling looks similar to what you have ,but,it allows for bolt removal out the back.

I highly recommend the L7 Bolt kit from TechTPaintball.com- Performance Matters ,You'll notice no kick at all when fired and you'll end up only have 3 o-rings that can go bad.

07-29-2007, 02:24 AM	#6 (permalink)
Chaos Spread The Virus Join Date: Mar 2006 Location: Hudson,MA	You can replace the banjo fittings with those from Tippmanns (You'd need one like the one from the LP kit for the RT/Cyclone kit) As for a reg,I'd say get a AKA 2 Liter over anything else.They have the fastest recharge rate and highest flow you can get.I got +/- 2 fps across the chono just as advertized. Recommend the Shocktech body kit for it as well.Milling looks similar to what you have ,but,it allows for bolt removal out the back. I highly recommend the L7 Bolt kit from TechTPaintball.com- Performance Matters ,You'll notice no kick at all when fired and you'll end up only have 3 o-rings that can go bad. __________________ Chaos PoG Member # 1018 LPPC Member #71 NO'MAAM #5 My Gallery My Feedback FORUM RULES AND FAQ'S Last edited by Chaos; 07-29-2007 at 02:29 AM..