Thread: DIY Valve Tool
View Single Post
Old 08-19-2011, 04:58 PM   #1 (permalink)
Rec Poster
Join Date: Oct 2007
Location: Rossiter, PA

Thumbs up DIY Valve Tool

Since I can't justify paying $19 + $7.08 for USPS First Class shipping for a piece of square-ended pipe from Palmer's, I got creative and made my own.

I used a Taiwanese 1/4" nutdriver and ground four sides of it flat on the bench grinder. It's not the prettiest but it worked to remove the valve retaining nut from my PMI-I. And it was free.

Last edited by AutoMaggerIX; 08-24-2011 at 03:49 AM.
AutoMaggerIX is offline   Reply With Quote