| 1. You should be able to use your high preasure tank as long as the reg on the gun is set to lower the preasure below 200 psi. I usually set mine around 160 but thats with stock internals, you should be able to go lower if it has NDZ internals. I'm really not familiar with that particular reg thats on the gun so I would highly recomend finding some more info on it like how to adjust it's output preasure. If you go too high you risk blowing your noid.
2.I just clean mine after everyday of play. Just a bit of lube on the o-rings is all. According to Smart parts your also supposed to clean the noid after every case of paint. But I've heard most people don't actually do it that often. I cleaned mine when I first got the gun and so far have only put about half a case through it so haven't cleaned it again so far.
3. Yep that appears to be a freak barrel without any inserts. You'll need to get an insert before using it. Most fields will either have them or be able to order them or you can find them online. You can get a full kit or just buy 1 that fits the paint you use most often.
4. No you can't actually see the eye it's not a break beam eye so theres nothing to see. It just senses if theres paint there.
Hope that helps some. I love my impulse and tend to be a bit obsessive about things so even though I haven't owned it long i've tried to learn as much as I possibly can about it. |