Quote:
Originally Posted by chplnstone  yes, if its an old style internal, you'll need a tool...old internals types have a nut in the back that recieves the rounded-square tool, if you look in the back after removing the hammer, you'll either see the old-style square or the cartridge valve flat face...cartrigde valve pushes out, no tool, old style core is soldered in, need a tool to gut it.
common o-rings will work in some places, but its usually easier just to get a seal kit, since you'll need the 12 gram face seal and cup seals anyway...
netsurferdude2's link there gets you to american paintball, great for parts including your mainspring and seal kit, but i dont know if they carry the tool...may have to go to palmers pursuit shop for that... |
Okay, apparently the owner of my local pro shop used to work on the PGPs all the time, so he might have the tools and parts for it. Im probably going to see what he can do before I go and buy the tools. Thanks for all the help.
PS, so the valve wont come out if it is the old style by just pushing it out of the back of the tube? I would need the valve tool to get any of it out correct?