mcarterbrown.com - View Single Post - PMI-3 in very good condition w/huge accessory lot

CJOttawa · 10-21-2011, 09:22 AM

Posted for "Canuck", here's a rare one:
PMI-3, precursor to the "VM-68" but far less common.
Vintage Rex data here: http://www.vintagerex.com/museum/PMI...n/PMI-III.html

Contact Canuck via PM here: http://www.mcarterbrown.com/forums/p...o=newpm&u=9095

Comes with:

stock barrel
bull barrel
Taso Expansion chamber system
3.5oz bottle (may need service)
valve tool
BBA kit
tank mounted squeegee holder with squeegee
TWO extra bodies - one VM-68 tiger stripe and one milled to heck, possibly not functional without work.

Only issue apparent: missing small part that holds "magic fingers" in place on feed neck.
Last time we had this out, I recall it was shooting +/-2fps over the chrono and beastly accurate.

$89 + shipping takes it all

Fitting stable-mate to your KP's!

10-21-2011, 09:22 AM	#1 (permalink)
CJOttawa Immune to sales tactics. Join Date: Dec 2006 Location: Canada's National Capital	PMI-3 in very good condition w/huge accessory lot Posted for "Canuck", here's a rare one: PMI-3, precursor to the "VM-68" but far less common. Vintage Rex data here: http://www.vintagerex.com/museum/PMI...n/PMI-III.html Contact Canuck via PM here: http://www.mcarterbrown.com/forums/p...o=newpm&u=9095 Comes with: stock barrel bull barrel Taso Expansion chamber system 3.5oz bottle (may need service) valve tool BBA kit tank mounted squeegee holder with squeegee TWO extra bodies - one VM-68 tiger stripe and one milled to heck, possibly not functional without work. Only issue apparent: missing small part that holds "magic fingers" in place on feed neck. Last time we had this out, I recall it was shooting +/-2fps over the chrono and beastly accurate. $89 + shipping takes it all Fitting stable-mate to your KP's! Last edited by CJOttawa; 10-21-2011 at 09:26 AM.