View Single Post
Old 10-25-2011, 08:34 PM   #893 (permalink)
Greenmtnphantom
Village Idiot
 
Greenmtnphantom's Avatar
 
Join Date: Jul 2006
Location: Graniteville VT
Send a message via AIM to Greenmtnphantom Send a message via MSN to Greenmtnphantom

Fan of EMR
Quote:
Originally Posted by Spider! View Post
Yeah, it's rare for it to be below 40 and dry here. Playing in raincoats and cold mud sucks (on your feet). Mags have their own set of CO2 problems, but you always have to have some heat transfer for CO2.

There was a finned, inline expansion chamber made. I think I saw one last year (used). That adds volume though.

Looking at a Nelson, you could fin the valve body on the outside, and I'm thinking that an aluminum insert shaped like a "venturi" bolt front, or inline honeycomb pushed inside the body with a compatible heat sink grease (if there is such a thing) would help boost surface contact internally.

I wonder if a loose sintered bronze sleeve would breathe well enough for that duty. If it didn't, the change in the flow curve might not be a bad thing.
Yeah on the flip side I can count the number of days above 90 on one hand each year.

For inserts I have something coming That might help out some. I'll let the cat out of the bag after I get a chance to test it.

I'm thinking the fins would likely be most helpful on a BBA or Dropout valves since 100% of the CO2 will have to to through the finned section of the valve.
__________________
Feedback http://www.mcarterbrown.com/forums/f...-feedback.html Gargoyle FAQ http://isppa.semkhor.com/newswire.asp?ctid=1116
Quote:
Originally Posted by Robertsr View Post
I don't so much make money, as provide a conduit for it's movement.
Stock class = 12grams and a stick feed. End discussion.
Greenmtnphantom is offline   Reply With Quote