View Single Post
Old 11-05-2011, 04:41 AM   #9 (permalink)
Halo
Foreign Eedjit
 
Halo's Avatar
 
Join Date: Apr 2011
Location: South Africa

CCM Fan
Quote:
Originally Posted by GoatBoy View Post

Funny you should mention that. I have a Vibe just for messing around with, and that reg worked fine for CO2. Main problem is it didn't have the right output pressure (only about 200PSI). I need something that outputs in the 400+PSI range (automag).

On that note I should also mention, Azodin advertises the output of their reg to be 0-700 PSI. This might vary with atmospheric conditions & where you are (IDK), but mine's output is closer to 140-580 PSI. Around 140 PSI is the lowest consistent out put I can get without it acting funny, while anything over 580 PSI it just vents, as the adjustment screw is too far out.
__________________
MCB Feedback

Last edited by Halo; 11-05-2011 at 05:39 AM.
Halo is offline   Reply With Quote