View Single Post
Old 11-29-2011, 10:18 PM   #7 (permalink)
CraigPalmer
Master Airsmith
 
CraigPalmer's Avatar
 
Join Date: Nov 2006
Location: Sacramento

Brass N Wood Fan
Palmers Fan
COPYPASTA!


A standard Stabilizer has about a 70:1 ratio.. That is plunger size to high pressure output hole. Generally the bigger the reg is, the better is works.


Greater ratios allow for better consistency throughout the full pressure range of the tank. 1/5 of the plunger surface area has regulated pressure applied to the opposite end of the plunger. Therefore it cannot be as consistent as a Stabilizer.


The bucket takes about 3 turns to remove. "Same as a paintball tank"


The adjustment is on the top of the reg. The reg can only be adjusted while removed from the ASA/gun/device/ or whatever you may have it attached to.

The air chamber size is the about the same as a micro rock.


Thanks
__________________

www.palmer-pursuit.com
or
http://palmerize.com/
916-923-9676

After Hours Tech Support
916-477-0762 SMS Text Message

http://www.facebook.com/pneumatics

FEEDBACK
CraigPalmer is offline   Reply With Quote