| Does anyone know
If anyone has made a mechanical PMR. I am considering doing this, seeing as they are rather cheep (Though not Matrix LCD/dm3 cheap which I also am considering...), and it would be something different. I figure it wouldn't be too hard, perhaps drill and tap some of the manifold holes to 10-32 or m3, add some barbs, hose, and a 3-way tucked into the gripframe somewhere....
I know that the matrix was initially envisioned as a mechanical and electronic marker, and the bolt looks to completely isolate the firing air from the air supply so I don't see an issue in the concept, but is there anything I am missing? |