View Single Post
Old 03-02-2012, 10:04 AM   #5 (permalink)
short304
AKA "BlackGates-5"
 
short304's Avatar
 
Join Date: Jan 2011
Location: the 303

Quote:
Originally Posted by MaD View Post
I am a bit curious about what you're selling. Are they all 90d buna or combinations in kits?
I have both Buna-70 and Buna-90 (which is the same "hardness"-rating as the Urethane o-rings we use in paintball). The o-rings that I sell are compaticble w/ probably around 98% (material-wise; cuz I still don't carry metric sizes, but likely will in the future) of the factory-spec ones. The only ones I can think of off the top of my head that I don't have anything compatible for are the Teflon orings used in Mags.

As far as kits - as long as I have a comprehensive list ofof orings for your gun (my personnal library is getting pretty good but I'm still missing a lot), and as long as they are compatible with the "factory-specs" (size and hardness) I will put any kit together for you or sell you just an individual ring! But again, I didn't intend this thread to be an add for my FS thread Feel free to check it out if you'd like (in my sig)! And thanks for asking!
__________________
Quote:
Originally Posted by DSA View Post
I thought I smelled Similac on your breath at D-Day Captain Short
O-RINGS FOR SALE (EVERY SIZE! ANY QTY!): http://www.mcarterbrown.com/forums/m...110-115-a.html

My Feedback:http://www.mcarterbrown.com/forums/f...-feedback.html
short304 is offline   Reply With Quote