View Single Post
Old 10-19-2007, 02:17 PM   #4 (permalink)
WilD's Avatar
Join Date: Mar 2006
Location: The Motor City
Send a message via AIM to WilD

Brass and Wood Fan
The feed would be offset to the right, but the conversion to stockclass feed is probably easiest on PTP F/X cocker bodies with the addition of a Phantom feed block. The body requires no modification as they have a bolt on feedneck and a contoured top that doesn't get in the way. The PTP Sleeper body would probably work too, but might require more modifications to the Phantom stock feed components to clear the sight rail (which is basically milled off on the F/X).

Lots of people have done this with the PTP Micrococker bodies as well.
WilD is offline   Reply With Quote