View Single Post
Old 05-01-2012, 01:51 AM   #11 (permalink)
LGswift
MCB Member
 
LGswift's Avatar
 
Join Date: Dec 2010
Location: Peterborough Ontario

Talking 12V Mod complete

Well I did the 12V mod wiring up 2 100 microferad capacitors on the input and output sides of the regulator as Tuna suggested and it was a total flipping flop. Re-wired it without the capacitors and the noise got through to the vibration sensor causing the Warp to spin constantly so I turned down the sensitivity on the board's pot until it stopped and it works great.

I understand how the capacitors filter out dirty voltage and I am nearly 100% confident I had it wired up properly however it seemed to work satisfactory without them after adjusting the sensitivity to account for dirty voltage. I'll do some tests tomorrow dry firing and with some paint RT'ing; should be seriously interesting...
__________________
LGswift's MCB Feedback

"Captain, they have us surrounded!" "Excellent, now we can fire on all directions!"
LGswift is offline   Reply With Quote