Thread: B2K problem
View Single Post
Old 05-02-2012, 04:56 PM   #6 (permalink)
ionbrother
Newbie
 
Join Date: Jul 2011

Ok i have the tray taken off of the body, took off the manifold, but i cannot find how to take apart the solenoid off of the manifold. the leak is coming from the solenoid/manifold area. and on the manifold, the o-ring on the side the connects to the body, the smallest oring is kinked. i'm not sure if it is supposed to be flush to the sides that it fits in.

I also noticed that the yellow wire running from one of they eyes is not in hooked into where it looks like the pds switch

Last edited by ionbrother; 05-02-2012 at 06:18 PM.
ionbrother is offline   Reply With Quote