Thread: PTP 2k9 issue
View Single Post
Old 05-07-2012, 08:12 PM   #1 (permalink)
Post Whore
henchman's Avatar
Join Date: Jan 2010

PTP 2k9 issue

So, I just got off the phone with AGD, and it seems that my 2k9 is not made correctly.
Even with the metal ring nt installed, the valve is too far back to tune properly. Anything over about 200-220, it starts venting air out the back because it needs to be turned up way too much. The same valve then transferred to a tac me shoots at 340 or so.

Anybody else had this problem with a PTP 2k9?
henchman is offline   Reply With Quote