if you have the valve tool... What I usually do is, stack the entire assembly on it, then lower the receiver on it and begin to feel for a smooth alignment as you press the receiver and valve together till it bottoms out on the threads. Then begin to twist it all together.
Once you have gone through a complete cycle into the threads, use an allen key to help go through the rest.
Apply a firm amount of torque, but do not over tighten it.
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods. splattttttt land