View Single Post
Old 10-27-2007, 10:48 PM   #1 (permalink)
Working on it!!!
noxx55's Avatar
Join Date: Apr 2006
Location: Meridian, Idaho

Noxx Feed System Separate parts available now

My new feed system is now available for preorder!!!

I have worked out all the bugs with it that I have found and from the few suggestions for improvement that I received. This system is now available separately.

Here is the system:

8-round springfeed tubes. Takes the hassle out of reloading a springfeed. The tube IS the springfeed so they basically act as a magazine.

You can choose between clear or smoke tubes.

The feedblock will be made to fit your marker and will require no permanent changes to your marker. These will fit the Phantom feeds, superstocker feeds, and any other feed that you can jam a 10-rnd tube into.

Here are some pics mounted on my Typhoon and of what the tubes look like in a capless harness:


x1 = $5
x5 = $20
x10 = $35
x20 = $65
x25 or more = $3 each

Smoke tubes will add $5 to the total. Shipping will depend on the amount you order.
Once you have ordered more than 25 tubes (I keep track of all orders), tubes will be $3 each regardless of how many you order at a time.

Springs can also be sold separately as well.
10" and less = $8
After 10" add $0.50 per inch

Questions or comments, post here or PM me. Thanks!!!
Wading through a mess, But I am moving forward...

Last edited by noxx55; 11-08-2007 at 09:52 AM.
noxx55 is offline   Reply With Quote