View Single Post
Old 06-21-2012, 10:35 PM   #9 (permalink)
audioSLAVE
Seasoned Member
 
Join Date: Oct 2009
Location: Manch Vegas, NH

Quote:
Originally Posted by adam45 View Post
The body is stock.
Yes the tip is coming loose or was I ran out of air.
Try replacing the o-ring on the tip if you haven't already. I was having similar issues with bolt stick and double firing on a mag last week pulling my hair out trying to swap out every part to trouble shoot before I ran out of air. The power tube tip not staying tight was one issue I ran into swapping out different spacers. My issue in the end was the body was refinished and polished where it met the rail and the tolerances were out of whack.
audioSLAVE is offline   Reply With Quote