View Single Post
Old 06-25-2012, 07:57 PM   #9 (permalink)
Marq's Man
Algae's Avatar
Join Date: Oct 2010

Originally Posted by Spider! View Post
Looks like the main guide threads into the mounting block. A steel rod that fits through the cross hole would be used to turn it, being on the lookout for loctite. An allen wrench would work, but will probably make a burr that you will have to sand down. You could wrap an allen with a few layers of electrical tape and try that, but back off if you think it will deform the hole. You might have a round screw driver shaft that is the right size.
Algae =

Thank you good sir. I completely and utterly missed that.
I want to buy a Sydarm!

Algae's B/S/T Feedback:
Algae is offline   Reply With Quote