View Single Post
Old 06-25-2012, 08:22 PM   #6 (permalink)
matteekay
Wait, what?
 
matteekay's Avatar
 
Join Date: Dec 2010
Location: The Front Range, CO

AKA Fan
Palmers Fan
Quote:
Originally Posted by DarkNinja View Post
I just got a pile of Palmer detents, I will look at my friends Hammer tomorrow and see if it can be done, you may need to drill the hole at the top of the body instead of the side. Another option is a Spyder style detent, a small hole drilled right into the breech area that is wider below should work too.
Take a look at those PPS ones if you'd be so kind. I'd just order one except it'd wind up being like $13 after shipping, lol. Might give the Tippmann one a shot (I have spares).

Quote:
Originally Posted by HOEPER View Post
The hammer I use came with a drop of nail polish just inside the barrel. That seemed to work, but I've since added a freak kit and using a tight bore I don't usually have issues.
My Freak kit is great for stopping rollouts but it's still pretty easy to feed two balls.

I agree, these are great little guns. I'm actually jettisoning an Empire Trracer in favor of my Hammer.
__________________
Quote:
Originally Posted by Hooligan
I found a way to make a sabot for a twinkie. The other tanks smell like banana cream filling now.
FS: Clean Pre98 RF Sniper ($100 Shipped)
Feedback
matteekay is online now   Reply With Quote