View Single Post
Old 07-07-2012, 05:17 PM   #1 (permalink)
tjd10684
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

problems with aftermarket breach?

I bought a warrior PB aftermarket cocker threaded ion breach. as soon as I air it up the bolt goes forward like the oring in the breach is dammaged or air is not getting to the front of the bolt. but I know that air is getting there and just in case I replaced all the orings with fresh new ones. same problem. tried different bolts I tried a DW v1 bolt NDZ skeleton bolt and as a last resort a stock bolt. All do the same thing. I know the bolts are good I tried them in other guns and they worked fine. different boards different solenoid cores different qev's everything. It all comes back to when I use that breach the bolt flys forward as soon as I air it up. So does anybody else have the same problem as me? Were you able to fix it? HOW?
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote