Thread: etek3 problems
View Single Post
Old 07-23-2012, 09:15 PM   #1 (permalink)
rangerjim3
MCB Member
 
rangerjim3's Avatar
 
Join Date: Oct 2011

etek3 problems

Today I got a Hush bolt that I had ordered from paintball gateway.com, I installed the bolt after watching a few videos on youtube to make sure that I did not miss anything critical. After installing the new bolt I went outside to shoot the gun and upon the first trigger pull it sounded like the gun wanted to fire, but the paintball just rolled out. I thought that prehaps I didn't have the bolt seated properly but I did check and it seems to be in correctly. I reinstalled the old bolt and it just does the same thing. As far as I know this gun was working perfectly up until today. The only thing that I noticed the last time I shot it was that first shot was always very under powered and it didn't seem to come out with any real power. After that first shot it seemed to always work fine. Any help would be appreciated!
Thanks,
-Jim
rangerjim3 is offline   Reply With Quote