Thread: etek3 problems
View Single Post
Old 07-25-2012, 08:15 PM   #3 (permalink)
Bill
Rec Poster
 
Join Date: Dec 2006

Any chance you put the pin in upside down? The vent hole in the side of the bolt should be facing down. If it is rotated 180 degrees the air coming from the valve will not flow thru the bolt. If this is not the issue, feel free to email me at paintballsupply@aol.com
I do not check in here very often.
__________________
WWW.PAINTBALLSHOWCASE.COM
Northeast Planet Eclipse Warranty Center

Used gun thread: http://www.pbnation.com/showthread.php?t=2689910
Bill is offline   Reply With Quote