rt classic valve guide screw
Just got my first automag, an rt classic. The valve body had an external screw/pin that was used to twist/lock the body in place on the rail. Well, mine broke off at the base, allowing the body to pull straight out after removing the banjo screw.
Is this guide screw/pin essential or will it be ok to operate it as is? I can't seem to locate a pn on any diagrams, and even if I did, I have no clue how I'd remove the broken segment from the body.
Thanks to Sean_chip, lzrsktr, practice Target, and wooulf for introducing me to mags at the cocker vs mags game. These things are pretty fun.
Last edited by paintballedbackin88; 09-01-2012 at 12:16 PM.