View Single Post
Old 09-20-2012, 05:03 AM   #8 (permalink)
thumper
pump snob
 
thumper's Avatar
 
Join Date: Jul 2006

Quote:
Originally Posted by James_Blond View Post
^ agreed. A sportshot sounds interesting.
Just think it through first.

dremel the vl2000 shell off leaving the feed neck, eyes, battery compartment/ motor housing, and enough of the shell to let another hopper shell sit flat on it. (think 3" diameter circle of material centered on feed neck)

Then dremel the sportshot's feed neck off and 1/2" of the shell around the feed neck... drill a hole in the sportshot for the paddles, move paddels and
then epoxy new shell in place. sand rough areas. paint w/ textured spray paint to cover the hatchet job.

bingo.. sportshot revvy. not real pretty, but works like a revvy.

tip: PLASTIC EPOXY
__________________
--- pıɐ-ןooʞ ǝɥʇ ʞuıɹp ʇ,uop---
thumper is offline   Reply With Quote