You can but those same eye wires in longer lengths from different electronics distributors. I havent had time to look em up lately but all it is is a small molex type connector that they use in pcs and electronics setups look online and just buy some. SOOOOOO much easier. Those wires are too small a gauge to mess with. If you dont want to buy a longer wire you can disconnect the molex connector from both ends using a small pin or eyeglass screwdriver then buy a roll of that small gauge wire from radioshack (if they still sell it, they may have to order it ) and make the wires the length you want. you can even use a bigger gauge wire if you can get the endcrimps that slide into the molex to fit a slightly bigger gauge. Those eyes are just reading in low millivolts so it wont hurt anything.