View Single Post
Old 10-08-2012, 01:17 AM   #6 (permalink)
Sidewinder Hoarder
toymachine's Avatar
Join Date: Dec 2010
Location: Fascist Valley

Yea, I've found 4oz tanks to be ideal for the phantom. And absolutely, at the very minimum respringing lower than 500psi is ideal (actually, I would respiring any nelson operating under 650psi). But with some relatively simple mods to the valve system (larger porting in powertube's valve head; larger porting/drilled out TPC; drilled out valve housing; etc), a couple folks on here have had good success with 400-450psi. Now if only I could figure it out for my own phantoms Well, then again, I'm happy with my phantoms running @ 850psi and 650psi...

BenoitOWN - What size/ci tanks will you have to go with the Ninja regs?
toymachine is offline   Reply With Quote