Thread: 98 custom pump
View Single Post
Old 10-10-2012, 07:18 PM   #10 (permalink)
super_stanchy
The Man With No Plan
 
super_stanchy's Avatar
 
Join Date: Nov 2008
Location: Oregon City, OR

CCM Fan
PBN Fan
Quote:
Originally Posted by aresfiend View Post
That is NOT the point of slotting the hammer.

You slot the hammer so that the bolt can recock with the hammer but the hammer can stay cocked when the bolt gets held in a closed position.

Vike's Complete Guide to Building a Spimmy | Everything you wanted to know about building a Spyder/Intimidator hybrid paintball marker

Basically the same deal for slotting the hammer, just make sure you attach the pump arm/s to the bolt and not the hammer.
so i think i went at it differently

i slotted the bolt, and left the hammer intact
(i made a new bolt from scratch too (aluminum for now, Stainless when its perfected)


Here is how i did it...
Slot the bolt to disconnect the linkage
Restrictor plate (.103" dia hole)
Removed the hammer oring
milled the body for a slot next to the bolt
attached a screw (for now) as the pump arm in the bolt
super_stanchy is offline   Reply With Quote