So, I redid the frontblock and just took more internal material away to allow me to possibly put a gauge port. I finished the backspin mod on the bolt and took the long thing for rear cocking and I'm going to be bending it to make it a MUCH shorter rear cocking mechanism that will be ~3/4 in. long instead of ~2.5 inches. I've also started hacking away at the body.
I'm planning on modifying the sear so that it stays forward and just removing the spring that pulls it back allowing for mechanical full auto. Also, does anyone know where I could get my hands on an offset to standard or offset to dovetail adapter?